Same-Day Dryer Repair in Clearwater
- Free service callwith any repair. $79 only if you decide not to repair
- Clearwater office5225 Tech Data Dr, 2nd Floor
- 90-day warrantyon parts and labor
Licensed, insured, background-checked · 58 dryers repaired in Clearwater over the past twelve months
$25 OFF Same-Day Repair
We call back within 15 minutes – 8 AM to 7 PM on weekdays and 8 AM to 6 PM on weekends
A Samsung Dryer in Clearwater Where Lint Took Out the Heating
The fault, every part that was replaced, and what the customer paid.
Samsung dryer, 102nd Pl N: no heat, and lint behind it
| Brand | Samsung dryer |
|---|---|
| Street | 102nd Pl N, Clearwater, FL |
| Complaint | Dryer stopped heating |
| What failed | Heating element, thermostats and thermistor, all damaged by heavy lint buildup |
| Replaced | Heating element, three thermostats, thermistor |
| Also done | Drum rollers lubricated; vent line and dryer interior cleaned; full dry cycle tested |
| Total | $296 (parts & labor) |
The complaint. The dryer still ran but no longer produced heat. The clothes came out as wet as they went in.
What the technician found. The cause was not a single burnt-out part. Excessive lint had built up in the machine, and the heating element, the thermostats and the thermistor had all failed under it.
What was done. The heating element was replaced, along with three thermostats and the thermistor. Because the lint was the cause, the vent line and the inside of the dryer were cleaned too, the drum rollers were lubricated, and a full dry cycle was run to confirm the heat and the airflow. The total was $296, parts and labor.
Customer Reviews
Dryer running without heat, or very hot for its size? Tell us what you see
We call back within 15 minutes – 8 AM to 7 PM on weekdays and 8 AM to 6 PM on weekends
One Complaint, Five Parts: How the Heat Chain Works
A dryer’s heat is made by one part and watched by several. That is why the Clearwater job above ended with five parts changed and not one.
The heating element
On an electric dryer, a coil of resistance wire that does the actual heating. Restricted airflow lets it run hotter than it was built for, and it burns through.
The thermostats
Typically two jobs: one cycles the heat on and off to hold the temperature, another is a high-limit cut-out that shuts the heater down if the air gets too hot. They sit in the hottest air in the machine, so they are first to suffer when lint blocks the flow.
The thermal fuse
A one-time safety link that opens permanently at its rated temperature. When it goes, the dryer may lose heat or stop altogether, and a fuse that blows twice is telling you about overheating, not about the fuse.
The thermistor
A temperature sensor that reports to the electronic control. If it reads wrong, the control cuts the heat early or never lets it start.
Lint, Heat and the Vent Line
The Samsung above is the argument for clearing the duct as part of the repair.
A dryer moves a large volume of hot, moist air out of the house, and lint travels with it. Whatever the lint screen does not catch settles in the housing behind the screen, in the duct and at the hood outside, and as the passage narrows the air slows down and the dryer runs hotter. The first sign is often longer cycles, and the parts above can fail after that.
The model residential building code, the IRC, allows an exhaust duct of up to 35 feet, less 5 feet for every 90-degree elbow, and calls for rigid metal duct, at least 4 inches in diameter, with no screen over the outlet, unless the dryer’s maker specifies something else. A long duct with several elbows loses airflow faster than a short, straight one, so it needs clearing sooner.
Two habits help on any dryer: empty the lint screen before every load, and if cycles start to lengthen, have the duct looked at before anything else. A burning smell, or a dryer too hot to touch on the outside, is a reason to stop using it and call.
What Dryer Repair Costs in Clearwater, FL
We quote only what appears on a closed invoice.
- $296 for the Samsung on 102nd Pl N
- Heating element, three thermostats and a thermistor, plus the vent line and interior cleaned, with parts and labor in the total.
- What the visit costs
- Nothing when you go ahead with the repair. The $79 call is charged only when you hear the diagnosis and the price and choose not to proceed.
- Why this repair was more than one part
- Lint was the cause, and the thermostats and thermistor around the element had been through the same heat. They were changed together and the vent line was cleaned, so the new parts did not go back into the same conditions.
Want a price for your own dryer? Give us the brand and the symptom
We call back within 15 minutes – 8 AM to 7 PM on weekdays and 8 AM to 6 PM on weekends
Dryer Brands We Repair in Clearwater
Across all appliances, the Clearwater order over the past twelve months was Whirlpool with 78 jobs, GE with 60 and Samsung with 59, then LG, Maytag and Frigidaire. The dryer above is a Samsung. Each brand has its own page.
Why Clearwater Calls Us for Dryers
- 58 dryers in a year. That is how many we repaired in Clearwater over the past twelve months, gas and electric.
- The trip is free with a repair. The $79 applies only if you decide not to go ahead.
- Based at Tech Data Dr. 5225 Tech Data Dr, 2nd Floor, Clearwater, FL 33760.
- Seven days a week. 8 AM to 7 PM, with same-day visits when the schedule allows.
- 90 days of warranty. Parts we fit and the work we did.
Where We Work Around Clearwater
The job above was on 102nd Pl N. We take dryer calls in Downtown Clearwater, Clearwater Beach, Island Estates, Countryside, North Clearwater, Coachman, Skycrest, Greenbriar and Sand Key, and in the Belleair area.
Find Us in Clearwater
The Clearwater office is at 5225 Tech Data Dr, 2nd Floor, Clearwater, FL 33760.
Open 8 AM to 7 PM on weekdays and 8 AM to 6 PM on weekends.
Request A Quote
Book a technician for same-day appliance repair
Call us: (727) 496-7853
or leave your number and we will come back to you.
We call back within 15 minutes – 8 AM to 7 PM on weekdays and 8 AM to 6 PM on weekends
Book Your Clearwater Dryer Repair
If the dryer has stopped heating, or is running far hotter than it should, switch it off and call (727) 496-7853 or book online. Tell us what the dryer does and we will find the earliest visit.
Clearwater Dryer Repair: Your Questions
Why were three thermostats and a thermistor replaced with the heating element?
Because lint was the cause, and the same heat that burned the element had damaged the parts that monitor it. On the Samsung on 102nd Pl N the technician replaced the element, three thermostats and the thermistor, then cleaned the vent line and the inside of the dryer so the new parts would not meet the same buildup. The total was $296, parts and labor.
Do you clean the vent line during a repair?
On the Clearwater Samsung above we did, because lint was what had caused the failure. Whether your duct needs it is something to raise with the technician on the visit.
My dryer takes two cycles now. Is that a repair or just lint?
Longer cycles are the first sign of restricted airflow, so clearing the lint screen and the duct comes first. If that does not fix it, the heat parts are next: element, thermostats, thermistor or, on a gas dryer, the igniter and valve coils.
Do you repair Samsung dryers?
Yes. Samsung is third on our Clearwater list with 59 jobs in the past twelve months across all appliances, and the Samsung dryer above is one of our Clearwater repairs.
When is the service call charged?
Only when you decide against the repair after hearing the diagnosis and the price. The call is then $79. If you go ahead, the trip is included.
Where is your Clearwater office?
5225 Tech Data Dr, 2nd Floor, Clearwater, FL 33760. Call (727) 496-7853 or book online.
How long does the warranty last?
Ninety days, on the parts we fit and the labor.

Andrew Teodor
Nataliya Teodor
Sem Green
John Goldin